By Provo Craft®. Slice thicker material with ease! These blades have a steeper blade angle (60 degrees vs 45) of harder more durable steel.

The replacement blades come 2 per package. The number of cuts each blade is good for varies depending on the material used. You will know when your blades are getting dull because your cuts will not be as crisp.

The deep cut blade is recommended for:

Magnet (0.035"/0.80mm thick) with the recommended settings of
Speed 3 (medium)
Pressure 5 (max)
Depth 6
Multi Cut 4

Chipboard (0.059"/1.50mm thick) with the recommended stettings of
Speed 3 (medium)
Pressure 4 (high)
Depth 6
Multi Cut 5

Stamp (0.0415"/1.05mm thick) with the recommended settings of
Speed 3 (medium)
Pressure 4(high)
Depth 4.6
Multi Cut 1